Classic Black Leather Aerial boots

PLEASE REFER TO THE href=" style="color: #3d85c6;">STANDARD SIZING CHART AND href=" style="color: #3d85c6;" title="Aerial boots, Fitting document, size chart, measurement chart, Isabella Mars" target="_blank">FITTING DOCUMENT TO FIND YOUR SIZE!

-The shaft is made of untreated calf leather which is more rigid to start with but will wear in nicely and gets softer with body heat.

-The back tongue is made of cowhide leather upper and Nappa leather lining

-Elastic panel under the foot is 3”inch wide.

-Height of the boots from floor to top edge is 15”inches (Size 1-4)

-Height of the boots from floor to top edge is 12.5”inches (Size 1 petite- 4 petite)

The first 4 photos show the 15" height and the last 3 photos show the 12.5" height (model is 5ft 4" - 1.65m). It is advisable to have the boots end well below the knee so they don't get in the way when wrapping the leg around equipment (hoxing etc.).

The boots lace up at the back and the back tongue is un-attached on one side, which gives room for adjusting and re-tightening as the leather softens.

These boots are suitable for Aerial training and performing on all equipment, i.e. Trapeze, Aerial Hoop, Aerial Rope (Corde Lisse), Aerial Silks etc.

You can add more grip to these Classic Aerial Boots by applying Rosin or Dry Grip Powder directly onto the boots - this can be cleaned off with natural or black shoe polish.

If you would like to have boots with extra grip (i.e. for rope climbing/drops/hanging of ankles/feet on trapeze or hoop etc.) please have a look at our Classic Aerial Boots w/ Suede Grip:

BOOTS ARE HANDMADE IN LONDON - DEPENDING ON WHICH STYLE/COLOUR YOU ORDER IT CAN TAKE US UP TO 3 WEEKS TO MAKE THEM, SO IF YOU REQUIRE THEM ANY SOONER JUST POP US AN EMAIL.